Midwest Technology Products

• CLICK ON STK # FOR CURRENT PRICE •

POWER SAFETY CONTROLS

iVac Switch Box BCTINT Used for tools and dust collectors op - erating on 115 Vac @ 15 Amps maximum. Auto - matically turns on your dust collector (up to 1 HP) or shop vacuum when you turn on a power tool plugged into the unit. The dust collector will con- tinue to run for 6 seconds after the tool has been

turned off in order to clear any dust and debris in the hoses. TUV safety approval and conforms to UL STD 244A and certified to CSA STDC22.2 #14. Stk. Mfr. Price 529500 SB-NA WEB

Restart Safety Plugs JDS Products The easy-to-install, inexpensive solution to anti-automatic restart safety, without the high cost of magnetic motor starters. The Sens- ing-Saf-Start® Plug prevents equipment restart following a power interrup - tion, and will not allow a reset until the equipment switch has been turned off. • Upgrades small machines to meet latest safety requirements • Plugs into machine power cord & plug (Model 1996) • Replaces old, frayed, ungrounded power cords (Models 1997, 98, 99) • Installs in minutes on: drill presses, belt sanders, band saws, power hack - saws, cut-off machines, table saws, small lathes, small milling machines, scroll saws & tool grinders You must install any matching plugs on the power cord. Model 1996 For 120V machines w/a good power cord & plug (when cord is not frayed & plug has a ground pin). Includes short extension- cord style, 14" cord on male plug end, 12" cord on female receptacle end. Stk. Mfr. Volts Amps Price 485650 1996 120 15 WEB Model 1997 For all 120V machines w/an old cord &/or you want the reset button closer to the machine for easy access, but still plugged into a duplex-type outlet. Plug is on the end of the 8' cord. Includes 20" cord on equip. switch end, 8' cord w/molded plug on power end. Stk. Mfr. Volts Amps Price 485651 1997 120 15 WEB Model 1998 For 120V machines w/an old cord &/or you want to connect to a disconnect box, or install either a 20 amp or twisting lock- type plug on the cord. Sensing-Saf-Start housing is located close to the machine w/out a plug on the end of the 8' cord. Includes 20" cord on equip. switch end, 8' cord on power end (no plug). Stk. Mfr. Volts Amps Price 485652 1998 120 18 WEB Model 1999 For 200-240V, single phase machines (3-wire).You must install any matching plugs on the power cord. Includes 20" cord on equip. switch end, 8' cord on power end (no plug). Stk. Mfr. Volts Amps Price 485653 1999 200-240 15 WEB • Complies w/latest OSHA & NFPA safety standards • Offers electrical disconnect compliance by unplugging

Safety Products SAFETY CANS

SAFETY CANS

Funnel Eagle Funnel may be used with safety cans. Fits snugly as a spout or can be detached and used as a funnel. Self-venting.

Stk.

Mfr. F-15

Size

Price

WEB

378469

9"L

Type 1 Safety Can w/Funnel Eagle Safety spring on spout closes cap tightly. Double-walled brass flame arrestor absorbs and dissipates hot air to keep vapor tempera- ture below ignition point. Attach self-venting 9" funnel for use as a spout.

Meets OSHA requirements. Stk. Mfr.

Capacity

Height

Price

WEB WEB WEB

378134 378140 378201

UI-10-FS UI-20-FS UI-50-FS

1 gal. 2 gal. 5 gal.

10"

9-1/2"

13-1/2"

Steel OilyWaste Can Justrite Combustion-safe can helps dispose of solvent and oily waste, rags and other material subject to spon- taneous combustion. Self-closing, hands-free cover snaps shut, stays shut when pedal is released. Lead-free galva - nized steel body with reinforcing ribs. Round, raised can with flow-through base. Powder-coated bright red finish with trilingual safety label. 10-yr. mfr.'s warranty.

Meets OSHA requirements. FM & UL approved. Stk. Mfr. Capacity Height

Price

WEB WEB

492200 492205

09100 09300

6 gal.

15-7/8"H 18-1/4"H

10 gal.

153 CLICK ON STK # FOR CURRENT PRICE | Phone 800.831.5904 | www.midwesttechnology.com