Tool & Equipment Catalog

KMJ38816A Water Pump Remover & Installer • 4.0L, 4.6L, G, E, K, K SPECIAL

KMEL50448

• The Water Pump on the Northstar Engine is Held in Place via a Cam Lock. KMJ38816 Engages in Notches on the Pump to Allow for Removal & Installation. The Tool has a 3 / 8 " Square Drive for use with a Torque Wrench.

LTD QTY

Auto TPMS Relearn Reset Activation Tool for GM Series Vehicle

SPECIALTY TOOLS

SRP $312.75

• Vehicles Equipped with 315 or 433 MHz TPMS • 9V Battery not Included • "Sensor Re-Learn Procedure" must be Performed after Tire Rotations, after Remote Control Door Lock Receiver Module Replacement & Tire Pressure Sensor Replacement

KMJ23653SIR Steering Column Lock Plate Compressor

SRP $114.04

KMJ21362

• Universal, SIR On 1993 and later SIR Steering Columns, the Retaining Ring Groove for the SIR Coil Module is Wider & Deeper. With this Change in Design it Hinders Retaining Ring Removal. KMJ23653SIR Eliminates this Problem by Extending the Ring Protector beyond the Coil Grooves.

• C/K, G/P Vans, 3L80, 3L80-HD 1.85 • Eliminates Possibility of Damage, Also Insures Seal does not Roll or Twist Clutch Inner Seal Protector

SRP $436.23

SRP $93.82

KMJ38543 Heater Hose Clamp Tool • 3.1L & 3.4L Engines on W-Cars

KMJ09886A

Door Handle Clip Remover GM Special Service Tool

LTD QTY

SRP $326.30

• Fits Between Door Panel & either Door or Manual Window Crank Handle

SRP $339.84

KMJ38188 Cylinder Head Broken Bolt Extractor Kit • 2.2L L61 (L850) Tools

KMJ41487

LTD QTY

Trans Cooler Line Hose Clamp Pliers

LTD QTY

• For 94 & Later U-Vans • Clamps can be Installed in Open Position

SRP $566.28

SRP $103.79

KMJ34730-100 Pressure Gauge Assembly Conversion Kit

KMCH-48096 EVAP Access Port Tool • All 5 / 16 " EVAP Line Systems • KMCH-48096 Connects into the

LTD QTY

EVAP System Line at the Canister Quick-Connect Fitting & Features an EVAP Port Fitting that Allows EVAP System Diagnosis. The Hose on the GE-41413-B EVAP Smoke Machine Attaches to the KMCH-48096 Fitting so Flow Tests & Leak Tests can be Performed Based on Service Information Procedures

• Convert the KMJ34730-C , Port Fuel Injection Diagnostic Kit to Accommodate either a 90° End Fitting or Straight Fitting • Straight Fitting is Required to Access the 4.3L High Output Engine in M/L Vans and S/T Trucks

SRP $279.25

SRP $111.68

KMJ34730-E Fuel Pressure Gauge Kit • Includes : Gauge Assembly for Testing Pressure, an Electronic Device to Manually Activate Injectors and an Assortment of Noid Lights

KMJ38695 Direct Clutch Spiral Snap Ring Installer • 4L80E • 1-Pc Snap Ring to Handle More Load

SRP $402.09

SRP $1,429.68

95 - S

Made with FlippingBook - Online catalogs