Midwest Technology Products

• CLICK ON STK # FOR CURRENT PRICE •

Hanson 41-PieceTap & Hex Die Set Hanson Fractional tap and hex die set. Machine screw sizes are 5/8", all others are 1". Includes tap and dies: machine screw sizes 4-40, 6-32, 8-32, 10-24, 10-32, 12-24, National coarse sizes 1/4-20, 5/16-18, 3/8-16, 7/16-14, 1/2-13, Na tional fine sizes 1/4-28, 5/16-24, 3/8-24, 7/16-20, 1/2

Rust Remover Krud Kutter Water-based formula penetrates metal to dis solve rust and oxidation through chemical action. Rust-inhibit ing crystals bond with metal surface to resist future rusting. Dry surface may be painted, welded, plated, lubricated or left bare. Spray, brush or dip on rusted or new metal, galvanized metal, aluminum, stainless steel, cast iron, chrome, brass, concrete, brick, stucco, stone, marble, porcelain, fiberglass, ceramic, glass, rubber, plastic. Stk. Mfr. Size Price 889360 MR32 32 oz. spray WEB

20, threading tools adj. die stock (1" dies), plain die stock (5/8" hex. dies), adj. handle tap wrench (taps 0 to 1/2"), T-handle wrench (taps 0 to 1/4"), 2-in-1 tap wrench (taps 1/4" to 1/2"), 18 leaf standard thread pitch gauge, pipe 1" hex (1/8-27 NPT) and case with removable tray. Stk. Mfr. Price 462626 24606 WEB

Metalworking CHEMICALS & FLUIDS

Steel Blue Layout Fluid Dykem An extremely thin translucent film coating with uniform deep blue color that prevents glare and dries in 2-4 minutes. Remains flexible without cracking or chipping and enables you to scribe sharp, clear, precise lines. Resistant to synthetic coolants, soluble oils, kerosene, gasoline, toluene.

Hanson 41-Piece MetricTap & Hex Die Set

Hanson Metric tap and hexagon die set. Includes tap and dies: 5/8" hexagon metric screw sizes 3mm-0.50, 4mm-0.70, 4mm -0.75,

Stk.

Mfr.

Size

Price

5mm-0.80, 5mm-0.90, 6mm-1.00, 1" hexagon metric screw sizes 7mm 1.00, 8mm-1.00, 8mm-1.25, 9mm-1.00, 9mm-1.25, 10mm-1.25, 10mm 1.50, 11mm-1.50, 12mm-1.50, 12mm-1.75, threading tools adj. die stock (for 1" dies), plain die stock (for 5/8" dies), adj. handle tap wrench (for 0 to 1/2" taps), T-handle wrench (taps 0 to 1-1/4"), 2-in-1 tap wrench (for 1/4" to1/2" taps, 16 leaf standard thread, pitch gauge, pipe 1" hex (1/8-28 BSP), case. Stk. Mfr. Price 463168 26317 WEB

WEB WEB WEB

374020 374022 374024

80000 80300 80400

16 oz. aerosol

4 oz. brush in cap 8 oz. brush in cap

Layout Fluid Remover & Cleaner Dykem For all surface preparation and removal of Dykem Layout Fluids. Provides better surface adhesion. Prepares metal surfaces. Dries quickly. Does not contain toluene or chlorinated solvents.

GearWrench 77-Piece SAETap & Die Set SAE/Metric tap and die set. Includes (18) Taper Taps: 4 x 40, 6 x 32, 8 x 32, 10 x 24, 10 x 32, 12 x 24, 1/4 x 20, 1/4 x 28, 5/16 x 18, 5/16 x 24, 3mm x 0.50, 3mm x 0.60, 4mm x 0.70, 4mm x 0.75, 5mm x 0.80, 5mm x 0.90, 6mm x 1.00, 7mm x 1.00 (14) Plug Taps: 3/8 x 16, 3/8 x 24, 7/16 x 14, 7/16 x 20, 1/2 x 13, 1/2 x 20, 8mm

Stk.

Mfr.

Size

Price

WEB

374025

82038

16 oz.

Tap Magic Cutting Fluid w/EP-X3 Tap Magic A noncorrosive, biodegradable, water-based fluid for most cuts and metals. EP-X3 additive provides a synergistic boost in performance. Should not be used on magnesium.

x 1.25, 9mm x 1.00, 9mm x 1.25, 10mm x 1.25, 10mm x 1.50, 11mm x 1.50, 12mm x 1.50, 12mm x 1.75 (2) Pipe Taps: 1/8 -28 and 1/8 - 27. (34) Hex Dies: 4 x 40, 6 x 32, 8 x 32, 10 x 24, 10 x 32, 12 x 24, 1/4 x 20, 1/4 x 28, 5/16 x 18, 5/16 x 24, 3/8 x 16, 3/8 x 24, 7/16 x 14, 7/16 x 20, 1/2 x 13, 3mm x 0.50, 3mm x 0.60, 4mm x 0.70, 4mm x 0.75, 5mm x 0.80, 5mm x 0.90, 6mm x 1.00, 7mm x 1.00, 8mm x 1.25, 9mm x 1.00, 9mm x 1.25, 10mm x 1.25, x 10mm x 1.50, 11mm x 1.50, 12mm x 1.50, 12mm x 1.75, 1/8 -28, 1/8 -27. Medium ratcheting T-wrench, (2) Tap Adapters Small and Medium, Medium Hex Die Adapter, Sliding Handle for Tap Adapter, 4mm hex key, (2) Thread pitch gauges SAE and Metric, Hex die spacer and molded case. Stk. Mfr. Price 432798 3887 WEB

Stk.

Mfr.

Size

Price

WEB

682861

50016Q

16 oz.

Tap Magic EP-Xtra® Cutting Fluid Tap Magic Ozone-friendly formula that provides outstanding performance on all cuts and all metals - even hard metals such as stainless steel. EP-Xtra, provides a synergistic boost in perfor mance. Highly effective for drilling, tapping, milling - all cuts on all metals.

Stk.

Mfr.

Size

Price

WEB WEB

682860 682862

10016E 10128E

16 oz. Gallon

CHEMICALS & FLUIDS Naval Jelly

Loctite Chemically removes rust from all iron and steel sur faces. Brush-on, wash off.

Stk.

Mfr.

Size Pint

Price

WEB

504290

01-80277

425 CLICK ON STK # FOR CURRENT PRICE | Phone 800.831.5904 | www.midwesttechnology.com