Midwest Technology Products

• CLICK ON STK # FOR CURRENT PRICE •

SAFETY CONTROLS

DRILL PRESSES

Restart Safety Plugs

8" 5-Speed Benchtop Drill Press Rikon Induction motor provides plenty of power for drilling, stepped pulleys give multiple spindle speed choices, adjustable depth stop for repeatable drilling. Table 6-5/8" x 6-3/8", tilts 45°, rotates 360°. Front on/off push button switch with removable safety tab for extra security. Chuck 1/2". Drilling capacity 1/2". Speed 620-3,100 RPM. Size 7" x 16" x 23". Weight 32 lbs.

SAFETY CONTROLS Woodworking Machinery JDS Products The easy-to-install, inex pensive solution to anti-automatic restart safety, without the high cost of magnetic motor starters. The Sensing-Saf-Start® Plug prevents equipment restart fol lowing a power interruption, and will not allow a reset until the equipment switch has been turned off. • Upgrades small machines to meet latest safety requirements • Plugs into machine power cord and plug (Model 1996) • Replaces old, frayed, ungrounded power cords (Models 1997, 98, 99) • Complies with latest OSHA and NFPA safety standards • Offers electrical disconnect compliance by unplugging • Installs in minutes on: drill presses, belt sanders, band saws, power hack saws, cut-off machines, table saws, small lathes, small milling machines, scroll saws and tool grinders You must install any matching plugs on the power cord. Model 1996 For 120V machines with a good power cord and plug (when cord is not frayed and plug has a ground pin). Includes short extension-cord style, 14" cord on male plug end, 12" cord on female receptacle end. Stk. Mfr. Volts Amps Price 485650 1996 120 15 WEB Model 1997 For all 120V machines with an old cord and/or you want the reset button closer to the machine for easy access, but still plugged into a duplex-type outlet. Plug is on the end of the 8' cord. Includes 20" cord on equip. switch end, 8' cord with molded plug on power end. Stk. Mfr. Volts Amps Price 485651 1997 120 15 WEB Model 1998 For 120V machines with an old cord and/or you want to connect to a disconnect box, or install either a 20 amp or twisting lock type plug on the cord. Sensing-Saf-Start housing is located close to the machine w/out a plug on the end of the 8' cord. Includes 20" cord on equip. switch end, 8' cord on power end (no plug). Stk. Mfr. Volts Amps Price 485652 1998 120 18 WEB Model 1999 For 200-240V, single phase machines (3-wire).You must install any matching plugs on the power cord. Includes 20" cord on equip. switch end, 8' cord on power end (no plug). Stk. Mfr. Volts Amps Price 485653 1999 200-240 15 WEB iVac Switch Box BCTINT Used for tools and dust collectors operating on 115 Vac @ 15 Amps maximum. Automatically turns on your dust collector (up to 1 HP) or shop vacuum when you turn on a power tool plugged into the unit. The dust collector will continue to run for 6 seconds after the tool has been turned off in order to clear any dust and debris in the hoses. TUV safety approval and conforms to UL STD 244A and certified to CSA STDC22.2 #14. Stk. Mfr. Price 529500 SB-NA WEB

Includes chuck key, holder and speed selection chart. Stk. Mfr. Volts

HP 1/3

Price

WEB

694170

30-100

120

10" 6.2 Amp Benchtop Drill Press

For greater precision than a handheld drill, this drill press offers a powerful induction motor with a LASER align ment system to execute precise drilling maneuvers. 5-speed system runs from 610-2,800 RPM for different material types. Adjustable depth stop and table height provide accurate depth control during drilling.

Chuck 1/2". Speed 610-2,800 RPM. Includes hex wrenches, chuck and key. Stk. Mfr.

Volts

Phase

Price

WEB

260384

DP9505-00

120

1

12"VS Bench Drill Press

Powerful enough to tackle big jobs, yet portable enough to take it anywhere. 1/2 HP induction motor pushes through almost anything you throw at it; with over 3-1/8" spindle travel for maximum depth cutting, and the X-shaped XACTA® laser ensures drilling accuracy. Digital readout dis plays spindle speed. Adjustable 9-1/2"W x 9-1/2"D tilts 45° .

Chuck 5/8". Drilling capacity 5/8". Speed 530-3,100 RPM. Size 29.7" x 19.9" x 12.2". Weight 85 lbs. Includes chuck key, drift key and hex wrenches. Stk. Mfr. Volts HP Phase

Price

WEB

486039

JWDP-12

115

1/2 1

13" 16-Speed Bench Drill Press Rikon Benchtop drill press features a cast iron base, the 11 3/16" dia. cast iron table swivels and tilts 90° , and the induction motor provides plenty of power for drilling. Three-wing cast iron feed handle provides excellent control when drilling. Thick metal column for strong, rigid support. Front on/off push-but ton switch with removable safety tab for extra security.

Chuck 5/8". Drilling capacity 5/8". Speed 220–3,600 RPM. Size 17-3/4" x 10-1/2" x 42". Weight 102 lbs. Includes chuck key, holder and speed selection chart. Stk. Mfr. Volts HP

Price

WEB

694190

30-120

120

1/2

354 www.midwesttechnology.com | Phone 800.831.5904 | CLICK ON STK # FOR CURRENT PRICE