Midwest Technology Products

20-Ton Commercial-Grade Hydraulic Shop Press

35-Ton Hydraulic Press

For pressing, bending and straightening operations. Hand-operated with pressure gauge for direct pressure readings. Easy-to-use. • Side frames are open for inserting long material • Tables raise & lower easily w/use of hand crank • Fast set-up ram extension screw • Ram moves laterally for added versatility • Straightness testing support uses centers or v-blocks • 2-yr. mfr.'s warranty

Ranger Robust 20-ton press designed for heavy use. Ideal for removal and installation of gears, bush- ings and bearings. Also excels at bending, straighten- ing and flattening. • Integrated 4" dia. 20-ton pressure gauge • Hydraulic cylinder moves laterally for versatility • Independent 2-speed hydraulic pump for maxi- mum performance

• Heavy steel construction • Adjustable table height (7-1/2"- 36-1/4") Size 60-1/4"H x 37"W x 27-1/4"D. Weight 255 lbs. (shipping). Includes 2 heavy-duty press plates. Stk. Mfr.

Ram 3" dia. Piston stroke 4-3/4". Screw stroke 4". Vertical table travel 23-5/8". Lateral movement 15". Work table 31" x 10-3/8". Size 43"L x 34"W x 69". Weight 783 lbs. Includes 2 bed plates & pump handles. Stk. Mfr.

Automotive GENERALTOOLS

Price

Price

$978.00

235581

RP-20HD

$4,309.00

486034

HP-35A

20- & 30-Ton H-Frame Hydraulic Presses Baileigh Ridged, fully welded main frame with indus- trial grade hydraulic components for years of use. • Full working width 19" (HSP-20A) or 22.5" (HSP-30) • Easily adjustable table • Electro-welded steel plate w/solid cross members Stroke 7.5" (HSP-20A) or 5.9" (HSP-30). Includes vee block set.

GENERALTOOLS

Double FlaringTool Set Lisle Makes both single and double SAE flares. Set includes everything to flare thin wall steel, aluminum or .040 wall soft copper tubing. Set includes 5 thread dies and adapters for forming double flares on the following tubing sizes: 3/16", 1/4", 5/16", 3/8" and 1/2". Includes long bar, 3/16" adapter, 1/4" adapter, 5/16" adapter, 3/8" adapter,

Stk.

Mfr.

Price

1/2" adapter, instructions & storage tray. Not for use on stainless steel tubing. Stk. Mfr.

$1,393.00 $1,813.00

222590 222591

HSP-20A HSP-30A

Price

$51.50

503907

31310

25-Ton Capacity Hydraulic Shop Press OTC Tough, economical press is ideal for pressing rear axle bearings, piston pins and more. Large 30" x 46" work area under ram makes positioning of even bulky work easy. Press bed is easily raised and lowered by lifting mechanism. Stroke length 5-3/4" - 46". Size 69-1/2"H x 30"W. Includes hydraulic hand pump, gauge, hose (1/4" ID x 6’), hydraulic ram w/6-1/4" stroke & pump mounting bracket.

Right Angle Ratcheting Screwdriver Lisle Fits where a regular screwdriver can't. Place handle over bit and turn. Reverse handle on bit to tighten. Use also with 1/4" round shaft screwdriver. Ratcheting action with infinite settings.

Includes straight slot & #2 Phillips bit assemblies. Stk. Mfr.

Price

$17.60

503901

64250

Stk.

Mfr.

Price

693307 $3,660.00 Accessory Set  Attach to ram’s forcing screw or support work on the press bed.  Includes bearing pulling attachment, 2 ram pushing adapters (3/4" dia. shank & 1" dia. shank), V-pushing adapter, 11-1/2" long V-blocks, ram forcing cap & threaded adapter. Stk. Mfr. Price 693316 1881 $734.00 1833

Nut SplittingTool General High-grade, heat-treated steel tool for removing frozen, hard-to-remove rusted nuts. Angled body gets into tight spots. Splits nuts up to 1/2" automotive series.

Stk.

Mfr. 175

Length 4-3/4"

Price

$34.60

417955

Throttle Pedal Depressor Lisle Holds throttle at constant rpm. Simply engage the nylon hook under the steering wheel and extend the depressor rod to the accelerator pedal. Adjustment screw fine tunes the rpm level. 40"L.

CAN’T FIND IT? We have access to 1,000’s of Products not listed here. Call us for assistance. 800-831-5904

Stk.

Mfr.

Price

$34.90

503744

48700

509

Phone 800.831.5904 | Fax 800.285.7054 | www.midwesttechnology.com

Made with FlippingBook - Online catalogs