Midwest Technology Products

• CLICK ON STK # FOR CURRENT PRICE •

1-Ton Telescoping Transmission Jack Bendpak Remove, transfer and install transmissions, transaxles and other drive-train components with ease. The fully-adjustable/sliding saddle adapts to just about any passenger car and light truck transmission or assem bly. Heavy-steel construction for maximum durability. Double-sealed hydraulics prevent contamination. Over

Nut Splitting Tool General High-grade, heat-treated steel tool for removing frozen, hard-to-remove rusted nuts. Angled body gets into tight spots. Splits nuts up to 1/2" automotive series.

Stk.

Mfr. 175

Length 4-3/4"

Price

WEB

417955

load system prevents jack from being used beyond rated capacity. Steel roller bearings minimize friction allowing effortless table adjustment when loaded. Lifting capacity 1st stage 2,000 lbs. 2nd stage 1,000 lbs. Height 37"-73". Base 39" x 39". Weight 222 lbs. Stk. Mfr. Price 235568 RTJ-1 WEB

Throttle Pedal Depressor Lisle Holds throttle at constant rpm. Simply engage the nylon hook under the steering wheel and extend the depressor rod to the accelerator pedal. Adjustment screw fine tunes the rpm level. 40"L. Stk. Mfr. Price 503744 48700 WEB

Automotive TESTING EQUIPMENT & SUPPLIES

10,000 lb. Capacity Two-Post Lift Bendpak Asymmetric 2-post lift offers wide or narrow installation in one configurable package. Durable, safe and reliable lift features an ex pandable top beam and Tru-Metric arms to suit virtually every vehicle lifting requirement. The simple, yet highly sophisticated lift design keeps service and maintenance costs to a minimum.

Terminal Tool Lisle Eliminate damaged wires and terminals. Re moves wires from terminals without damage to either. Prongs depress the "barbs" on conventional terminals.

Stk.

Mfr.

Price

Features 30° rotated columns for added door-opening clearance and interior car access. Tru-Metric carriage and arm design allow loading vehi cles symmetrically or asymmetrically. Double-telescoping screw pads with gouge and tear-resistant polyurethane pads help increase workplace safety. Features padded overhead safety shut-off bar, safety locks in each column, single-point safety release, dual hydraulic direct-drive cylinders and self-lu bricating dura-glide UHMW polyethylene bearing system. ETL approved. Rise 69"H. Column 145"H. Lift time 45 sec. Drive-through clearance 93.75" to 101.75". Load per arm 2,500 lbs. Lifting capacity 10,000 lbs. Size 145"H x 145"W. Weight 1,786 lbs. Includes 4-piece 63mm stackable adapter set, graphic safety decals, main tenance decals and vehicle lifting point guide. Stk. Mfr. Volts Phase Price 235601 XPR-10AS 220 1 WEB Double FlaringTool Set Lisle Makes both single and double SAE flares. Set includes everything to flare thin wall steel, aluminum or .040 wall soft copper tubing. Set includes 5 thread dies and adapters for forming double flares on the following tubing sizes: 3/16", 1/4", 5/16", 3/8" and 1/2". Includes long bar, 3/16" adapter, 1/4" adapter, 5/16" adapter, 3/8" adapter, GENERAL TOOLS

WEB

503889

56500

TESTING EQUIPMENT & SUPPLIES

Heavy-duty Remote Starter Switch OTC Allows one person to start and crank engine while under hood or from either side of vehicle. With indicator, red light glows when

connected to a hot circuit; light goes off when switch is depressed. High current, heavy-duty push button switch. Leads made from heavy-duty, oil and grease resistant, 12-gauge wire. Clips with protective boots open to an extra wide 5/8" for ease of hook-up. Soft, non-slip rubber grip. Dimensions: 11.8" × 4.7" × 2.5". Shipping weight: 0.8 lbs. Stk. Mfr. Price 693420 3650 WEB

Remote Starter Lisle Tough, smooth-working reliable switch. Fea tures heavy gauge, rubber-covered copper wire. Depress button to jog or start the engine.

Stk.

Mfr.

Price

WEB

503817

20750

1/2" adapter, instructions and storage tray. Not for use on stainless steel tubing. Stk. Mfr.

55 Series Digital Multimeter OTC Multimeter provides all the base func tions required for today's automotive testing. Max. display 2,000 counts. Features: auto/man ual range, auto power off, diode check, conti nuity buzzer, data hold and max hold.

Price

WEB

503907

31310

Right Angle Ratcheting Screwdriver Lisle Fits where a regular screwdriver can't. Place handle over bit and turn. Reverse handle on bit to tighten. Use also with 1/4" round shaft screwdriver. Ratcheting action with infinite settings.

DC volts 200mV to 200V. AC volts 2V to 200V. DC current 200/2000uA. AC current 200/2000uA. Resistance 400 Ω to 2M Ω Temperature -58°F to 392°F Dimensions 9.2" × 6" × 1.6". Weight .08 lbs. Includes test leads and temperature probe. Stk. Mfr. Price 693398 3910 WEB

Includes straight slot and #2 Phillips bit assemblies. Stk. Mfr.

Price

WEB

503901

64250

493 CLICK ON STK # FOR CURRENT PRICE | Phone 800.831.5904 | www.midwesttechnology.com