Midwest-2026-2027-catalog

• CLICK ON STK # FOR CURRENT PRICE •

Pin Vise General Nickel-plated swivel head pin vise for holding drills, taps, wire. 0-1/8" capacity.

Small Hole Gauge Set Starrett For accurately measuring small holes, slots, grooves and recesses. Hardened contact surfaces have split ball, which is adjusted to size by knurled knot at end of gauge. Final size in 1,000ths of an inch is obtained by mea

Includes 2 double end collets. Stk. Mfr.

Dia.

Length

Price

suring over ball contacts with a micrometer. Includes 4 sizes (.125" to .500") and case.

WEB

MEASURING & LAYOUT Metalworking 417670 92

5/16"

3-11/16"

Stk.

Mfr.

Price

Telescoping Gauge Starrett Automatic self-centering handle. Plungers telescope within each other providing a positive seat in all positions. Constant spring tension gives uniform contact pressure. Plungers are easily locked at any

WEB

875390

S829EZ

ANGLE-IZER® Contour Gauge General Ideal for any job or hobby where contour duplication is essential. Body is painted enamel and brass-plated. Stainless steel pins with overall travel of 5-1/4". Inch graduations.

desired setting. Contact ends are hardened and ground to a radius to provide proper clearance. 3-Piece Set Includes 3 sizes #s 299A, B, C (1/2" to 2-1/8") and case. Stk. Mfr. Range Price 874305 S229FZ WEB 4-Piece Set Includes 4 sizes #s 579A, B, C, D (5/16" to 2-1/8") and case. Stk. Mfr. Range Price 875326 S579GZ WEB

Stk.

Mfr. 837

Size

Price

WEB

419615

6" x 3-1/2"

Center Gauge Chicago Brand Scaled in 14ths, 20ths, 24ths and 32nds of an inch.

6-PieceTelescoping Gauges Set Chicago Brand Gauges are equipped with a plunger that can be locked in the measuring position by a knurled screw or locking nut in the end of the handle. Maximum measuring capacity is 6". Made of hardened steel.

Stk.

Mfr.

Price

WEB

302650

50233

Center Gauge C391 Starrett Spring-tempered steel. Satin chrome finish. All gauging surfaces are ground. U.S. Standard 60°.

Includes 6 gauges (5/16" to 6"). Stk.

Mfr.

Price

Stk.

Mfr.

Price

WEB

302642

50215

WEB

874608

C391

Depth Gauge Starrett Gauge quickly obtains measurements of a blind hole (32nds and 64ths, 1/2 mm) by adjusting rule to required depth. Finished, hardened steel head and precision, machine- divided, tempered steel rule (6"L x 3/16"W). Gauge adjusts smoothly then locks into position. Base is cut out on one side for easier readings and accurate measurements. Fixed 90° angle depth

Radius Gauge Set Starrett Set features 5 different gauge surfaces on each gauge for both convex and concave radii. Precision finished radii with extra smooth accurate edges. 1/64" to 1/2" radius. Includes 25 gauges and case.

gauge with 2-1/2" precision-ground work base. Stk. Mfr.

Stk.

Mfr.

Price

Price

WEB

874256

S167CHZ

WEB

874340

237

Tap & Drill Gauge Starrett See at a glance the correct size tap drill for any com mon size machine screw tap in "NF" or "NC" thread series and will leave the right amount of stock for approximately 65% full thread. Also shows the correct body size drill to use and provides 60 holes marked with the number size and decimal equivalent of the drill that fits each hole. Thoroughly tested for accuracy after hardening. Satin finish. Tap size: 2 - 56 to 1/4 - 28. Drill gauge numbers 1 to 60. Range: tap drill 50 to 3, body drill 44 to 1/4. Tool size 5/64"T x 2-5/16"W x 6-1/4"L. Stk. Mfr. Price 874265 185 WEB

Micrometer Depth Gauge Starrett Measures depth of slots, shoulders and projec tions to .001". Range is 0 to 3" with 3 rods. Sleeve and thimble have a no-glare satin chrome finish. Graduations are quick-reading with every 1,000th numbered. The preci sion-ground screw has a 1" movement. A locknut holds the setting at measurement desired. Supplied with case.

Stk.

Mfr.

Item

Price

WEB

875290

440Z-3RL

2-1/2"L x 1/8" dia.

422 www.midwesttechnology.com | Phone 800.831.5904 | CLICK ON STK # FOR CURRENT PRICE